Recording Temperature Or Ph For A Test Point Within A Sample Plan; Adding Optional Comments To A Caution Or Fail Atp Test Result - 3M LM1 User Manual

• To add a comment to the result, tap Add Comment
comments appears. Tap [Add Comments] then tap comment to add. Tap [OK]. Tap [Back]. If you decide not to add a
comment, tap [Back]
3. To test another Test Point, tap Next Test Point
• Or, to do a retest, tap [Retest]
• Or, to display the list of Test Points, tap List View

Recording Temperature or pH for a Test Point within a Sample Plan

1. To start a new run, tap the Sample Plan, then tap [New Test Run...].
• If a Sample Plan does not appear, tap scroll up
additional Sample Plans.
• If you are restarting a Sample Plan that you did not complete, tap the Sample Plan with the starting date and time
you want. If that Sample Plan does not appear, tap scroll up
Plan names.
• The List View appears, showing a list of the Test Points in the Sample Plan, and the number of Test Points in each
result category:
• To select a Test Type, tap [Test types...] then tap the Test Type to be performed. Tap [Done].
2. To select a Test Point to be tested, tap the Test Point.
• If a Test Point includes an ATP test and a Temperature or pH recording, the Temperature or pH recording appears
immediately after the ATP test.
• You can test points in the Sample Plan in sequence or in any order. The first Test Point in the Sample Plan appears on
the screen. If you want to test a different Test Point, tap Next Test Point
can display a previous test point by tapping Previous Test Point
• To display an image and a description of the Test Point, tap information
to return to the previous screen.
3. Tap the field. Use the number pad to enter the Temperature test result or pH test result.
4. The test result appears and is stored in the memory so it can be synchronized with the 3M Clean-Trace Hygiene
Management Software. The result is also interpreted using your established pass/fail limits and is displayed on the
screen as PASS , or FAIL
• To add a comment to the result, tap the Add Comment
previously-selected comments will appear. Tap [Add Comments], and then tap the comment to add. Tap [OK].
Tap [Back].
• If you decide not to add a comment, tap Back
5. To test another Test Point, tap Next Test Point
• Or, to do a retest, tap [Retest]
• Or, to display the list of Test Points, tap List View

Adding Optional Comments to a Caution or Fail ATP Test Result

1. To view or add comments for a displayed test result, tap Add Comment
previously-selected comments appear.
2. Tap [Add Comments], and then tap the comment to add. Tap [OK]. Tap [Back].
3. If you decide not to add a comment, tap [Back]
to return to the previous screen.
or Previous Test Point
then tap [Start]
Number in
Total number of
Pass
Test Points
category
.
to go to the previous screen.
or Previous Test Point
then tap [Start]
to go to the previous screen.
. The Add Comments screen and any previously added
until the Test Point you want appears.
.
.
or scroll down or swipe the list up or down to display
or scroll down
Number in Number in
Caution
category
until the test point you want appears. You
.
next to the Test Point name. Tap [Back]
symbol . The Add Comments screen and any
until the Test Point you want appears.
.
.
. The Add Comments screen and any
10
EN
(English)
to display additional Sample
Fail
category