Advertisement
H
Dual-Extruder Print - Hardware Installation
The following steps show how to feed the right nozzle. For the other hardware installations
steps please see with Part B Hardware Installation in this guide.
1
Install the filament holder in the mounting
hole on the side of the printer and place a
spool of filament on the holder.
NOTE:
The filament should be loaded clockwise.
3
Press the "Utilities" menu on the screen and set the temperature of the right nozzle for the
filament, then press the "Load" button. Finish the feeding operation step by step according
to the instructions on the screen.
NOTE:
This document is set based on the Raise3D PLA filament, which is delivered together with the
printer. Therefore we advise that you use this PLA for testing.
Pro-Series
A
B
Mounting
holes
C
D
3D Printer
2
Feed the filament through the guide tube.
/ Quick Start Guide
Advertisement
