Table of Contents
Advertisement
Resetting the AX-GMLAN29-SWC
1. The Blue reset button is located inside the interface, between the two connectors. The button is accessible outside the interface,
no need to open the interface.
2. Press and hold the reset button for two seconds, and then let go to reset the interface.
3. Refer to "Programming the Interface" from this point.
AxxessInterfaces.com
TROUBLESHOOTING
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
AX-GMLAN29-SWC
I N S TA L L AT I O N I N S T R U C T I O N S
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
K
®
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
P
NOWLEDGE IS
OWER
Metra recommends MECP
certified technicians
REV. 1/5/18 INSTAX-GMLAN29-SWC
Hide quick links:
Advertisement
Table of Contents
