Table of Contents
Advertisement
Resetting the AXDIS-GMLN30
1. The Blue reset button is located inside the interface, between the two connectors. The
button is accessible outside the interface, no need to open the interface.
2. Press and hold the reset button for two seconds, and then let go to reset the interface.
3. Refer to "Programming the Interface" from this point.
AxxessInterfaces.com
TROUBLESHOOTING
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
AXDIS-GMLN30
I N S TA L L AT I O N I N S T R U C T I O N S
Having difficulties? We're here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
K
®
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
P
OWER
REV. 3/17/21 INSTAXDIS-GMLN30
Advertisement
Table of Contents
