Interrupt Triggering (Jp2); Interrupt Source (Jp3); Version Control (Jp4/Jp5) - Advantech PCL-730 User Manual

2.4.2

Interrupt triggering (JP2)

Jumper JP2 selects the trigger edge (rising or falling) on which the card will trigger an
interrupt. Jumper settings appear below:
2.4.3

Interrupt source (JP3)

Jumper JP3 selects the source of the card's interrupt.
2.4.4

Version control (JP4/JP5)

Jumper JP4 controls the pin assignments for CN1 and CN6 while JP5 controls it for
CN2 and CN6. Setting this jumper to A1 makes the card's pin assignments the same
as the A1 version.
Setting Channel
IDI0 Isolated DI Channel 0
IDI1 Isolated DI Channel 1
DI0 TTL DI Channel 0
DI1 TTL DI Channel 1
Connector
CN2 Pin 1
CN2 Pin 2
CN4 Pin 1
CN4 Pin 2
9 PCL-730 User Manual