2.3
Switch and Jumper Settings
The PCL-730 card has one function switch and four jumper settings.
The following sections tell how to configure the card. You may want to refer to the
opposite page for help identifying card components.
Table 2.1: Connectors, Jumpers, and Switches
Label
CN1
CN2
CN3
CN4
CN5
CN6
JP1
JP2
JP3
JP4/5
SW1
Function
Isolated output
Isolated input
Digital output
Digital input
E.GND (external ground)
Isolated input/output
Interrupt level
Interrupt trigger
Interrupt source
Version control
Card base address
7
PCL-730 User Manual