Related Manuals for Advantech PCE-7131
Summary of Contents for Advantech PCE-7131
- Page 1 User Manual PCE-7131/5131/5031 LGA1151 ® ® Intel Core™ i7/i5/i3/Pentium ® Xeon PICMG 1.3 Single Host Board with VGA/DVI-D/M.2/ (ECC)DDR4 U-DIMM/SATA3.0/ USB3.0/GbE...
- Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
-
Page 3: Declaration Of Conformity
Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. - Page 4 We have carefully inspected the PCE-7131/5131/5031 mechanically and electrically before shipment. It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the PCE-7131/ 5131/5031, check it for signs of shipping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our...
-
Page 5: Table Of Contents
Table 1.2: Connectors ..............5 Board Layout: Jumper and Connector Locations........6 Figure 1.1 Jumper and connector locations......... 6 Block Diagram................... 7 Figure 1.2 PCE-7131 block diagram..........7 Figure 1.3 PCE-5131 block diagram..........7 Figure 1.4 PCE-5031 block diagram..........8 Safety Precautions ..................8 Jumper Settings .................. - Page 6 Figure 3.30Security ..............55 3.2.5 Boot .................... 56 Figure 3.31 Boot ................. 56 3.2.6 Save & Exit ................. 57 Figure 3.32Save & Exit............... 57 Chapter Value-Added Software Services ..59 Value-Added Software Services ............. 60 4.1.1 Software API................60 PCE-7131/5131/5031 User Manual...
- Page 7 Table B.2: VGA connector (VGA1) ..........84 RS 232 Serial Port (COM12)..............85 Table B.3: RS-232 serial port (COM2)........85 USB 2.0 Header (USB56 & 910)............. 85 Table B.4: USB Header (USB56 & 910) ........85 USB3.0 Header (USB12) ................ 86 PCE-7131/5131/5031 User Manual...
- Page 8 Table B.21:1 MB memory map ........... 93 B.22 PCI Bus Map................... 93 Table B.22:PCI Bus Map ............93 Appendix C Programming the GPIO ....95 Supported GPIO Register ............... 96 GPIO Registers..................96 GPIO Example Program-1 ..............96 PCE-7131/5131/5031 User Manual viii...
-
Page 9: Chapter 1 Hardware Configuration
Chapter Hardware Configuration... -
Page 10: Introduction
Introduction PCE-7131/5131/5031 is a PICMG 1.3 form-factor single host board which is designed with Intel® C246 (PCE-7131), Q370 (PCE-5131), and H310 (PCE-5031) PCH for industrial applications that need high computing power and strong I/O capa- bility. PCE-7131/5131/5031 supports 14nm manufacturing technology, LGA1151 socket Intel®... -
Page 11: Specifications
Memory RAM: – PCE-7131: Up to 32 GB in two 288-pin DIMM sockets. Supports dual-chan- nel DDR4 2400/2666 SDRAM WITH or WITHOUT ECC function. – PCE-5131/5031: Up to 32 GB in two 288-pin DIMM sockets. Supports dual- channel DDR4 1866/2133 SDRAM WITHOUT ECC function. -
Page 12: Graphics
Supports single/dual 10/100/1000 Mbps Ethernet port(s) via the dedicated PCI Express x1 bus which provides 500 MB/s data transmission rate. Controller: – LAN 1: Intel® I219LM (PCE-7131/5131); I219V (PCE-5031) – LAN 2: Intel® i211AT (PCE-5131/5031); I210AT(PCE-7131) 1.3.6 Industrial features ... -
Page 13: Jumpers And Connectors
Jumpers and Connectors Connectors on the PCE-7131/5131/5031 single host board link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. -
Page 14: Board Layout: Jumper And Connector Locations
BAT1 Button battery socket BAT2 External battery connector GPIO1 GPIO pin header (SMD pitch-2.0 mm) DIMMA1 Memory connector channel A DIMMB1 Memory connector channel B Board Layout: Jumper and Connector Locations Figure 1.1 Jumper and connector locations PCE-7131/5131/5031 User Manual... -
Page 15: Block Diagram
Block Diagram Figure 1.2 PCE-7131 block diagram Figure 1.3 PCE-5131 block diagram PCE-7131/5131/5031 User Manual... -
Page 16: Safety Precautions
Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer’s instructions. PCE-7131/5131/5031 User Manual... -
Page 17: Jumper Settings
EMI problem. The JWDT1 jumper settings control the outcome of what the com- puter will do in the event the watchdog timer is tripped. Table 1.4: Watchdog timer output (JWDT1) Function Jumper Setting 2-4 closed * Reset 4-6 closed * default setting PCE-7131/5131/5031 User Manual... -
Page 18: System Memory
(JOBS1) is a 2-pin connector for setting enable/disable alarm while the on-board security event acts. System Memory PCE-7131/5131/5031 has two 288-pin memory sockets for (ECC) DDR4 1866/2133 memory modules with maximum capacity of 32GB. (Maximum 16GB for each DIMM) PCE-7131 supports ECC and non-ECC DDR4 U-DIMM memory modules. -
Page 19: Processor Installation
To install a processor, first turn off your system. The PCE-7131/5131/5031 is designed for Intel® LGA 1151 socket processors. Pull the bar beside the processor socket outward and lift it. - Page 20 Align the cuts on the processor with the edges of the socket. Replace the socket cap; lower the retainer bar and clip it shut. The finished processor installation. PCE-7131/5131/5031 User Manual...
-
Page 21: Processor Cooler Installation
Processor Cooler Installation Purchasing PCE-7131/5131/5031 optimized CPU cooler (P/N: 1960052651N021) from Advantech is a must. Other brand CPU coolers are NOT compatible with PCE- 7131/5131/5031. Advantech specially designed CPU cooler and CPU plate is for bet- ter heat dissipation efficiency and for enhancing rigidity of the CPU card (neither is it compatible with Intel boxed CPU cooler). - Page 22 PCE-7131/5131/5031 User Manual...
-
Page 23: Chapter 2 Connecting Peripherals
Chapter Connecting Peripherals... -
Page 24: Introduction
USB Specification 2.0 and 3.1 (Gen1), and support transfer rates up to 480 Mbps (USB2.0) and 5 Gbps (USB 3.0). The USB controller can be disabled in the system BIOS setup. Note! Disabling USB controller in the BIOS menu will turn off all USB ports function. PCE-7131/5131/5031 User Manual... -
Page 25: Vga Connectors (Vga1)
BIOS setup. Optional dual COM cable, 1701092300, is available as well. Note! PCE-5031VG sku features one rear COM and one internal pin-header COM port. PCE-7131/5131/5031 User Manual... -
Page 26: Ps/2 Keyboard And Mouse Connector (Kbms1/Kbms2)
SYSFAN1) This fan connector supports 3-pin or 4-pin fan coolers and smart fan functions. Note! CPU and system fan connectors can support both PWM and DC FAN. System fan connector can support one system fan. CPUFAN1 SYSFAN1 PCE-7131/5131/5031 User Manual... -
Page 27: Front Panel Connectors (Jfp1, Jfp2 & Jfp3)
PWR_LED & Key Lock 2.8.2 External speaker (JFP2) JFP2 is a 4-pin connector for an external speaker. The PCE-7131/5131/5031 pro- vides an onboard buzzer as an alternative to an external speaker. To enable the buzzer, set pins 3 and 4 as closed. -
Page 28: Hdd Led Connector (Jfp2)
If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to JFP1. This connection enables you to turn your computer on and off. JFP1 PWR_SW Reset HDD LED SNMP JFP2 Speaker JFP3 PWR_LED & Key Lock PCE-7131/5131/5031 User Manual... -
Page 29: H/W Monitor/Watchdog Timer/Infrared
Open: Disables OBS Alarm 2.9.2 Watchdog timer (JWDT1) This is for setting action trigger by watchdog timer. 1-2 Pin Close: No Action 2-3 Pin Close: System Reset 2.9.3 Infrared interface (JIR1) This is a 5-pin header for an infrared device. PCE-7131/5131/5031 User Manual... -
Page 30: Lan Ports (Lan1 & Lan2) And Front Panel Lan Indicator Connector (Lanled1)
LED1 LED2 Green On 1000Mbps Link On 1000Mbps Active Green on Flash 1000Mbps Link Off 100Mbps Link On Orange On 100Mbps Active Orange On Flash 100Mbps Link Off 10Mbps Link On 10Mbps Active Flash 10Mbps Link Off PCE-7131/5131/5031 User Manual... -
Page 31: High Definition Audio Module Interface (Hdaud1)
2.11 High Definition Audio Module Interface (HDAUD1) HDA UD IO1 This HDAUD1 pin header is the connection interface to Advantech's high definition audio module. Note! Advantech high definition audio module ordering information. P/N: PCA-AUDIO-HDA2E 2.12 GPIO Header (GPIO1) GPIO1 Provides 10-pin header connector for 8-bit Digital I/O usage. Refer to Appendix B for detailed information on the pin assignments and programming guide in Appendix C. -
Page 32: Case Open Connector (Jcase1 And Jcaseop_Sw1)
The 2-pin case open connector is for chassis with a case open sensor. When the case is open, the buzzer on motherboard will beep. Table 2.3: Case open mode Jumper Case open mode/JCASE1 JCASEOP_SW1 Normally Open(N.O.) 2-3 pin short Normally Closed(N.C.) 1-2 pin short PCE-7131/5131/5031 User Manual... -
Page 33: Serial Ata Interface (Sata1~Sata5)
Serial ATA Interface (SATA1~SATA5) SATA 1~5 The PCE-7131/5131/5031 features high performance serial ATA interface (5*600MB/ s) which eases cabling to hard drivers or CD/DVD drivers with long cables. These five on-board SATA ports can be configured as RAID 0, 1, 10, or 5 (PCE-5031 do not support RAID). -
Page 34: Lpc Extension Interface (Lpc1)
2.15 LPC Extension Interface (LPC1) LPC1 LPC1 is a 14-pin female pin header for connection with an Advantech LPC module. PCE-7131/5131/5031 User Manual... -
Page 35: Ami Bios Setup
Chapter AMI BIOS Setup... -
Page 36: Introduction
The Setup program uses a number of menus for making changes and turning the special features on or off. This chapter describes the basic navigation of the PCE-7131/5131/5031 setup screens. Figure 3.1 Setup program initial screen... -
Page 37: Entering Setup
Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. Power Type Choose this item correspond with your power supply type. PCE-7131/5131/5031 User Manual... -
Page 38: Advanced Bios Features Setup
3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the PCE-7131/5131/5031 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can dis- play an Advanced BIOS Setup option by highlighting it using the <Arrow>... -
Page 39: Figure 3.4 Trust Computing
Security Device Support Enable or disable BIOS for security device support. You can purchase Advan- tech TPM (Trust Platform Module) PCA-TPM-00A1E for your security device. Note! TCG EFI protocol and INTIA interface will not be available. PCE-7131/5131/5031 User Manual... -
Page 40: Figure 3.5 Acpi Settings
Enable Hibernation "Enable or disable" Hibernate (OS/S4 Sleep State). This option may not be effective with some OS. Lock Legacy Resources Enables or disables Lock Legacy Resources. PowerOn by Modem "Enabled" or "Disabled" PowerOn by Modem PCE-7131/5131/5031 User Manual... -
Page 41: Figure 3.6 Amt Configuration
Enable MEBx debug message output. Un-Configure ME Un-configure ME without password. Amt Wait Timer Set timer to wait before sending ASF_GET_Boot_Options. Enable/Disable alert specification format. Active Remote Assistance Process Trigger CIRA boot. USB Configure PCE-7131/5131/5031 User Manual... -
Page 42: Figure 3.7 Firmware Update Configuration
Enable/Disable USB configure function. PET Progress User can Enable/Disable PET events progress to receive PET events or note. WatchDog Enable/Disable Watchdog Timer 3.2.2.4 PCH-FW Configuration Figure 3.7 Firmware Update Configuration PCE-7131/5131/5031 User Manual... -
Page 43: Figure 3.8 Smart Setting
ME FW Image Re-Flash Enable/Disable ME FW Image Re-Flash function. 3.2.2.5 Smart Setting Figure 3.8 Smart Setting Smart self test Run SMART self test on all HDDs during POST. PCE-7131/5131/5031 User Manual... -
Page 44: Figure 3.9 Super Io Configuration
3.2.2.6 Super IO Configuration Figure 3.9 Super IO Configuration Figure 3.10 Serial Port 1 or 2 Configuration PCE-7131/5131/5031 User Manual... -
Page 45: Figure 3.11Parallel Configuration
Figure 3.11 Parallel Configuration Serial Port 1 -2 configuration "Enable or Disable" serial port Parallel Port configuration "Enable or Disable" parallel port PCE-7131/5131/5031 User Manual... -
Page 46: Figure 3.12Pc Health Status
Use this to set the ACPI shutdown temperature threshold. When the system reaches the shutdown temperature, it will be automatically shut down by ACPI OS to protect the system from overheating damage. CPUFAN1 Mode Setting Enable/Disable Smart Fan. SYSFAN1 Mode Setting Enable/Disable Smart Fan PCE-7131/5131/5031 User Manual... -
Page 47: Figure 3.13S5 Rtc Configuration
Wake System with Fixed Time Enable or disable system wake on alarm event. Select fixed time, system will wake on the hr:min:sec as specified. Select dynamic time, system will wake on the current time. Note! "+" increase minute(s) PCE-7131/5131/5031 User Manual... -
Page 48: Figure 3.14Serial Port Console Redirection
Figure 3.14 Serial Port console redirection COM1 – Console Redirection Settings Console Redirection Enable or Disable Serial Port for Out-of-Band Management/ Windows Emergency Manage- ment services (EMS) – Console Redirection Console Redirection Enable or Disable PCE-7131/5131/5031 User Manual... -
Page 49: Figure 3.15Cpu Configuration
Boot Performance Select the performance state that the BIOS will set before OS handoff. Intel(R) Speedstep(tm) Allows more than two frequency ranges to be supported. CPU C states Intel C states setting for power saving. PCE-7131/5131/5031 User Manual... -
Page 50: Figure 3.16Platform Misc Configuration
Figure 3.16 Platform Misc Configuration Native PCIE Enable PCI Express Native Support Enable/Disable. This is only available in Vista. Native ASPM On enable, Vista will control the ASPM support for the device. If disabled, the BIOS will. PCE-7131/5131/5031 User Manual... -
Page 51: Figure 3.17Sata Configuration
3.2.2.12 SATA Configuration Figure 3.17 SATA Configuration SATA Controller(s) Enable or disable SATA Device SATA Mode This can be configured as AHCI and RAID PCE-7131/5131/5031 User Manual... -
Page 52: Figure 3.18Pci Subsystem Settings
PCI-X Latency Timer Value to be programed into PCI-X Latency Timer Register. VGA Palette Snoop Enables/Disables VGA palette registers snooping. Above 4G Decoding Enable / disable above 4G decoding SR-IOV Support Enable / disable SR-IOV Support PCE-7131/5131/5031 User Manual... -
Page 53: Figure 3.19Pci Express Settings
Controls the execution of UEFI and Legacy Storage OpROM. – Video Controls the execution of UEFI and Legacy Video OpROM. – Other PCI devices Determines OpROM execution policy for devices other than Network, Stor- age, or Video. PCE-7131/5131/5031 User Manual... -
Page 54: Figure 3.20Usb Configuration
Allows you to select the USB transfer time-out value. [1,5,10,20sec]. Device reset time-out Allows you to select the USB device reset time-out value. [1,5,10,20sec]. Device power-up delay This item appears only when you set device power-up delay item to [manual]. Mass Storage Devices PCE-7131/5131/5031 User Manual... -
Page 55: Chipset
3.2.3 Chipset Figure 3.21 Chipset 3.2.3.1 System Agent (SA) Configuration Figure 3.22 System Agent (SA) Configuration VT-d Check to enable VT-d function on MCH. PCE-7131/5131/5031 User Manual... - Page 56 PCIE14/PCIE15 of D29: F0/ F1/ F2/ F3/ F4/ F5/ F6/ F7/, PCIE16/ PCIE17/ PCIE18/ PCIE19 of D27: F0/ F1/ F2/ F3, Graphics device should be primary PCIE. Internal Graphics Keep IGD enabled based on the setup options. PCE-7131/5131/5031 User Manual...
-
Page 57: Figure 3.23Graphics Configuration
Figure 3.23 Graphics Configuration LCD Control Select Primary IGFX Boot Display (VBIOS Default, DP1, CRT, DP2). PCE-7131/5131/5031 User Manual... -
Page 58: Figure 3.24Peg Port Configuration
PEG Port Configuration Figure 3.24 PEG Port Configuration Enable Root Port Enable or disable the root port Max Link speed Configure PEG 0:1:0 max speed Detect Non-compliance device Detect Non-Compliance PCI express Device in PEG PCE-7131/5131/5031 User Manual... -
Page 59: Figure 3.25Memory Information
3.2.3.4 Memory Configuration Figure 3.25 Memory Information Maximum Memory Frequency Maximum memory frequency selections in Mhz. 3.2.3.5 PCH-IO Configuration Figure 3.26 PCH IO Configuration PCE-7131/5131/5031 User Manual... -
Page 60: Figure 3.27Pci Express Configuration
High Precision Timer Restore AC Power Loss Power Off, Power On or last state to restore AC power loss. 3.2.3.6 PCI Express Configuration Figure 3.27 PCI Express Configuration PCI Express Root Port 1~20 status PCE-7131/5131/5031 User Manual... -
Page 61: Figure 3.28Usb Configuration
Pre-condition work on USB host controller and root ports for faster enumeration. XHCI Mode Select Smart auto, Auto, Enable, and Disable mode of operation of XHCI con- troller. Note! Smart auto setting remembers last setting, but auto mode does not. PCE-7131/5131/5031 User Manual... -
Page 62: Figure 3.29Pch Azalia Configuration
3.2.3.8 HD Audio Configuration Figure 3.29 PCH Azalia Configuration HD Audio Control detection of the HD Audio device. Disable=HDA will be unconditionally disabled. Enable=HDA will be unconditionally enabled. Auto=HDA will be enabled if present, disabled otherwise. PCE-7131/5131/5031 User Manual... -
Page 63: Security
Security Figure 3.30 Security Select Security Setup from the PCE-7131/5131/5031 setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press <Enter>. -
Page 64: Boot
Select the keyboard Numlock state. Quiet Boot Enable/Disable Quiet Boot option. Boot Option Priorities Displays information about boot priority options of devices. Hard Drive BBS Priorities Set the order of the legacy devices in this group. PCE-7131/5131/5031 User Manual... -
Page 65: Save & Exit
Restore Defaults Select this option to restore BIOS configuration as origin. Save as User Defaults Select this option to save user's configuration. Restore User Defaults Select this option to restore BIOS to user's configuration. PCE-7131/5131/5031 User Manual... - Page 66 *When you make some critical changes, the system will still reboot even if you chose "Save changes and exit". PCE-7131/5131/5031 User Manual...
-
Page 67: Value-Added Software Services
Chapter Value-Added Software Services... -
Page 68: Value-Added Software Services
Advantech platforms. API plays the role of catalyst between developer and solution, and make Advantech embedded platforms easier and simpler to adopt and operate with customer applications. -
Page 69: Software Utility
The Monitoring utility allows the customer to monitor sys- tem health, including voltage, CPU and system tempera- ture and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused. PCE-7131/5131/5031 User Manual... - Page 70 PCE-7131/5131/5031 User Manual...
-
Page 71: Chapter 5 Chipset Software Installation Utility
Chapter Chipset Software Installation Utility... -
Page 72: Before You Begin
The drivers for the PCE-7131/5131/5031 are located on the Advantech Website. The driver in the folder will guide and link you to the utilities and drivers for Windows. Updates are provided via Service Packs from Microsoft®. -
Page 73: Chapter 6 Integrated Graphic Device Setup
Chapter Integrated Graphic Device Setup... -
Page 74: Introduction
Before installing this driver, make sure the INF driver has been installed in your system. See Chapter 5 for information on installing the INF driver. Enter the Advantech support website, then search product PCE-7131/5131/5031. You can see driver inside. Note! Intel only support x86 graphics driver for Windows 10. -
Page 75: Lan Configuration
Chapter LAN Configuration... -
Page 76: Introduction
Introduction PCE-7131/5131/5031 has dual/single Gigabit Ethernet LANs with dedicated PCI Express x1 lanes. Intel I219LM/I219V(LAN1) and I211AT/I210AT(LAN2) that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. Installation... -
Page 77: Intel Me
Chapter Intel ME... -
Page 78: Introduction
MEISetup.exe to complete the installation of ME driver. Note! If the Intel® Management Engine (Intel® ME) driver has not been suc- cessfully installed, you may see an error on a "PCI Simple Communica- tions Controller" in Device Manager. PCE-7131/5131/5031 User Manual... -
Page 79: Intel Usb 3.0
Chapter Intel USB 3.0... -
Page 80: Introduction
Introduction PCE-7131/5131/5031 provides Intel® USB 3.1(Gen2) and the data transfer rates of USB 3.1(Gen2) (10 Gbps) which is 2 times faster that USB 3.1(Gen1) (5 Gbps). Installation Enter the Advantech support website, then search product PCE-7131/5131/5031. You can see driver inside. -
Page 81: Sata Raid Setup
Chapter SATA RAID Setup... -
Page 82: Introduction
The data is striped across a two-drive array forming the RAID 0 component. Each of the drives in the RAID 0 array is then mirrored by a RAID 1 component. 10.2 SATA RAID Driver and Utility Setup Enter the Advantech support website, then search product PCE-7131/5131/5031. You can see driver inside. PCE-7131/5131/5031 User Manual... -
Page 83: Appendix A Programming The Watchdog Timer
Appendix Programming the Watchdog Timer... -
Page 84: Introduction
Introduction The PCE-7131/5131/5031’s watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the pro- grammed period. This section describes the operation of the watchdog timer and how to program it. -
Page 85: Table A.1: Watchdog Timer Registers
Write 1 to bit 4: Watchdog timer count mode is 1000 times faster. If bit 3 is 0, the count mode is 1/1000 seconds mode. If bit 3 is 1, the count mode is 1/1000 minutes mode. PCE-7131/5131/5031 User Manual... -
Page 86: Example Program
; Select registers of watchdog timer dx,al al,08h dx,al ;----------------------------------------------------------- DEC DX AL,2DH DX,AL AL,00H DX,AL ;---------------------------------------------------------- Dec dx ; Enable the function of watchdog timer al,30h dx,al al,dx al,01h dx,al ;----------------------------------------------------------- Dec dx ; Set second as counting unit al,0f5h dx,al PCE-7131/5131/5031 User Manual... - Page 87 ; Unlock NCT6776D Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer dx,al al,dx al,08h dx,al ;----------------------------------------------------------- DEC DX AL,2DH DX,AL AL,00H DX,AL ;---------------------------------------------------------- DEC DX AL,2DH DX,AL AL,00H DX,AL ;---------------------------------------------------------- DEC DX PCE-7131/5131/5031 User Manual...
- Page 88 ; Lock NCT6776D al,0aah dx,al Enable watchdog timer to be reset by mouse ;----------------------------------------------------------- Mov dx,2eh ; Unlock NCT6776D Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer dx,al al,08h dx,al ;----------------------------------------------------------- PCE-7131/5131/5031 User Manual...
- Page 89 ; Select registers of watchdog timer dx,al al,08h dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer al,30h dx,al al,01h dx,al ;----------------------------------------------------------- Dec dx ; Enables watchdog timer to be strobe reset by keyboard al,0f7h dx,al al,dx PCE-7131/5131/5031 User Manual...
- Page 90 ; Enable the function of watchdog timer al,30h dx,al al,01h dx,al ;----------------------------------------------------------- Dec dx ; Generate a time-out signal al,0f7h dx,al ;Write 1 to bit 5 of F7 register al,dx Or al,20h dx,al ;----------------------------------------------------------- Dec dx ; Lock NCT6776D al,0aah dx,al PCE-7131/5131/5031 User Manual...
-
Page 91: Appendix B I/O Pin Assignments
Appendix I/O Pin Assignments... -
Page 92: Parallel Port Connector (Lpt1)
Parallel Port Connector (LPT1) Table B.1: Parallel port connector (LPT1) Signal Signal STROBE* AUTOFD* INIT* SLCTINI* ACK* BUSY SLCT * low active VGA Connector (VGA1) Table B.2: VGA connector (VGA1) Signal Signal GREEN BLUE H-SYNC V-SYNC PCE-7131/5131/5031 User Manual... -
Page 93: Rs 232 Serial Port (Com12)
RS 232 Serial Port (COM12) Table B.3: RS-232 serial port (COM2) Signal SOUT USB 2.0 Header (USB56 & 910) Table B.4: USB Header (USB56 & 910) Signal Signal USB1_VCC5 USB2_D+ USB2_VCC5 USB1_D- USB2_D- USB1_D+ PCE-7131/5131/5031 User Manual... -
Page 94: Usb3.0 Header (Usb12)
Table B.5: USB 3.0 Header (USB12) Signal Signal USB1_VCC5 USB_P+_P2 USB3.0_RXN_P1 USB_P-_P2 USB3.0_RXP_P1 USB3.0_TXP_P2 USB3.0_TXN_P1 USB3.0_TXN_P2 USB3.0_TXP_P1 USB3.0_RXP_P2 USB_P-_P1 USB3.0_RXN_P2 USB_P+_P1 USB2_VCC5 Reserve PS/2 Keyboard/Mouse Connector (KBMS1) Table B.6: PS/2 keyboard/mouse connector (KBMS1) Signal KB DATA MS DATA KB CLOCK MS CLOCK PCE-7131/5131/5031 User Manual... -
Page 95: B.7 External Keyboard Connector (Kbms2)
Table B.8: CPU and system fan power connector (CPUFAN1) Signal +12V Detect FAN1_PWMOUT Power LED and Keyboard Lock Connector (JFP3 / PWR_LED & KEY LOCK) Table B.9: Power LED and keyboard lock connector (JFP3 / PWR_LED & KEY LOCK) Signal LED power (+3.3 V) KEYLOCK# PCE-7131/5131/5031 User Manual... -
Page 96: B.10 External Speaker Connector (Jfp2 / Speaker)
SPK_CN17P2 SPK_CN17P3 SPK_CN17P4 B.11 Reset Connector (JFP1 / RESET) Table B.11: Reset connector (JFP1 / RESET) Signal RESET # B.12 HDD LED (JFP2 / HDDLED) Table B.12: HDD LED (JFP2 / HDDLED) Signal HDD LED SATA LED PCE-7131/5131/5031 User Manual... -
Page 97: B.13 Atx Soft Power Switch (Jfp1 / Pwr_Sw)
Hi-definition Audio Link Connector (HDAUD1) Table B.14: Hi-definition audio link connector (HDAUD1) Signal Signal ACZ_VCC ACZ_SYNC ACZ_BITCLK ACZ_SDOUT ACZ_SDIN0 ACZ_SDIN1 -ACZ_RST ACZ_12V B.15 SM Bus Connector (JFP2 / SNMP) Table B.15: SM bus connector (JFP2 / SNMP) Signal SMB_DATA SMB_CLK PCE-7131/5131/5031 User Manual... -
Page 98: B.16 Lan1 And Lan2 Led Connector (Lanled1)
Table B.16: LAN1 and LAN2 LED connector (LANLED1) Signal #LAN1_ACT #LAN2_ACT V33_AUX V33_AUX #LAN1_LINK1000 #LAN2_LINK1000 #LAN1_LINK100 #LAN2_LINK100 V33_AUX B.17 GPIO Header (GPIO1) Table B.17: GPIO header (GPIO1) Signal SIO_GPIO0 SIO_GPIO4 SIO_GPIO1 SIO_GPIO5 SIO_GPIO2 SIO_GPIO6 SIO_GPIO3 SIO_GPIO7 +5V_Dual_GPIO PCE-7131/5131/5031 User Manual... -
Page 99: B.18 Fixed I/O Ranges Decoded By Intel Pch
Interrupt Controller Interrupt Controller Interrupt A4h - A5h Interrupt Controller Interrupt Controller Interrupt A8h - A9h Interrupt Controller Interrupt Controller Interrupt ACh - Adh Interrupt Controller Interrupt Controller Interrupt B0h - B1h Interrupt Controller Interrupt Controller Interrupt PCE-7131/5131/5031 User Manual... -
Page 100: B.19 System I/O Ports
Communication port (COM2) IRQ4 Communication port (COM1) IRQ5 Available IRQ6 Communication port (COM8-11) for PCA-COM485 module IRQ7 Parallel Port IRQ8 System COMS/Real-time clock IRQ9 Available IRQ10 Available IRQ11 Communication port (COM3-6) for PCA-COM232 module IRQ12 PS/2 mouse PCE-7131/5131/5031 User Manual... -
Page 101: B.21 1 Mb Memory Map
PCI Slot 2 AD30 INT C, D, A, B GNT B REQ B PCI Slot 3 AD29 INT D, A, B, C GNT C REQ C PCI Slot 4 AD28 INT A, B, C, D GNT D REQ D PCE-7131/5131/5031 User Manual... - Page 102 PCE-7131/5131/5031 User Manual...
- Page 103 Appendix Programming the GPIO...
-
Page 104: C.1 Supported Gpio Register
OUT DX,AL --------------------------------------------------------------- Configure logical device, configuration register CRE0,CRE1,CRE2 --------------------------------------------------------------- MOV DX,2EH MOV AL,09H OUT DX,AL DEC DX MOV AL,30H OUT DX,AL INC DX IN AL,DX OR AL,10000000B; GPIO7 is active DEC DX MOV AL,07H OUT DX,AL PCE-7131/5131/5031 User Manual... - Page 105 ;Set GPIO is normal not inverter OUT DX,AL; DEC DX MOV AL,E1H OUT DX,AL INC DX MOV AL,??H ; Put the output value into AL OUT DX,AL ------------------------------------------ Exit extended function mode | ------------------------------------------ MOV DX,2EH MOV AL,AAH OUT DX,AL PCE-7131/5131/5031 User Manual...
- Page 106 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2019...