PENSOTTI PNCC-32N Instruction Manual page 61

66
P08
70
P08
INSTALLATION INSTRUCTIONS
P P08 - M
ARAMETER AXIMUM
To enter the parameters menu, follow the previously described
procedure (see paragraph 5.2 'Accessing the parameters menu' -
steps 1-5). Select parameter P08.
6. Use ' ' and '
adjust the value of the parameter from '99' (maximum value of
default) to the required value.
7. Press mode selection button '
the new adjustment operative. The parameter number (P08) will
appear on the display
To exit from the parameters menu, press simultaneously '
8.
and ' ' buttons
BTU O
UTPUT
' buttons (D.H.W temperature setting)
' to confirm and to render
.
.
and
'
58