Accessing The Parameters Menu - PENSOTTI PNCC-32N Instruction Manual

5.2 Accessing the parameters menu

To modify the pre-set values of the parameters reported in the previous table, open the parameter settings menu as
follows:
2
P00
1
P01
INSTALLATION INSTRUCTIONS
1. Place mode selection button '
by symbol;
2. Keep pressed '
symbol and 'P00', to appear on the display.
for
3. Release buttons '
4. Use ' ' and '
to select the parameter to modify;
5. Adjust the value of the parameter using the procedure described
in the following pages.
' in OFF position, indicated
' and ' ' buttons simultaneously and wait
' and ' ';
' buttons of heating temperature setting
53