Architectural Features - Extreme Networks Extreme Wireless WSAP3825i Installation Manual

Hide thumbs Also See for Extreme Wireless WSAP3825i:
Table of Contents

Advertisement

Table 3: WS-AP3825 LED Indications (continued)
LED
3 (Ethernet link state) LAN 2
4 (Radio 2 status)
5 (Radio 1 status)

Architectural Features

Console Port
The WS-AP3825 i and e models both include a single RJ45 console port (shown in
and
Figure 2
on page 9) for debug purposes. This port enables connection of a console device to the AP
through a serial cable. The console device can be a PC or workstation running a VT-100 terminal adapter
emulator, or a VT-100 terminal.
LAN Port
The WS-AP3825 has two 10/100/1000BaseT RJ45 LAN ports (see
attached directly to a 10/100/1000BaseT LAN segment. This segment must conform to the IEEE 802.3
or 802.3u specifications.
The APs appear as Ethernet nodes and perform a bridging function by moving packets from the wired
LAN to remote workstations on the wireless infrastructure.
The LAN ports also support power over Ethernet (PoE) based on the IEEE 802.3af standard. Refer to
Installation
on page 14, for information on supplying power to the AP network port from a network
device, such as a switch, that provides Power over Ethernet (PoE).
Reset Switch
The WS-AP3825 provides a Reset Switch to reset or restore factory default configurations. Use a pen tip
or a nail to press the switch button through the hole (located on the top side of the AP). If you hold
down the button for less than 5 seconds, the AP performs a software interrupt, causing it to drop all
connections and reset. If you hold the button down for 5 seconds or more, any configuration changes
are removed, and the factory default configuration restores to the AP.
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version .
Status
On Green
On Amber
Off
On Green
Off
On Green
Off
Introduction
Description
Indicates a valid 100Mbps Ethernet
link.
Indicates a valid 1Gbps Ethernet link.
Indicates the link is down.
Indicates Radio 2 is enabled.
Indicates Radio 2 is not on.
Indicates Radio 1 is enabled.
Indicates Radio 1 is not on.
Figure 1
on page 8
Figure 1
on page 8) that can be
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extreme wireless ws-ap3825e

Table of Contents