Appendix A: Specifications; External Power Supplies - Extreme Networks Extreme Wireless WSAP3825i Installation Manual

A
Specifications

External Power Supplies

Internal Antenna Access Points
External Antennas
This appendix lists the specifications for the WS-AP3825i and WS-AP3825e access points and an
external 12V DC power supply.
Table 5: Specifications for the WS-AP3825i and WS-AP3825e
Item
Enclosure material
Power source
Power consumption
Outside dimensions (max) WS-AP3825e
Antenna (WS-AP3825i only)
Uplink Interface
RoHS compliant
Radio Configuration
Operating temperature
External Power Supplies
WS-AP3825 APs may be powered by IEEE 802.3af compliant PoE cables connected to the Ethernet
ports in the connector bay. This is usually the preferred method of powering for users that plan to
mount the devices on ceilings or high up on walls. You can also power these APs with optional external
power supplies.
Table 6: Universal Specifications for an External Power Supply
Item
Enclosure material
AC Input
DC output
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version .
Specification
Metal base, plastic housing
802.3af compliant PoE PD,
12V DC input
< 12.94W (Max.)
Length: 190.5mm (7.5")
Width: 145mm to 180.0mm (7.5" to 7.09")
Thickness (not including mounting bracket): 29mm
(1.13") to 38mm (1.5").
6x internal antennas, single band
GbE Ethernet x1 with PoE
Yes
IEEE 802.11ac, a/b/g/n
2.4/5 GHz single-band,
Dual-radio, 3x3:3 MIMO
32°F to 122°F (0°C to +50°C)
Specification
Plastic housing
100-240V
12V
30