Extreme Networks Extreme Wireless WSAP3825i Installation Manual page 41

The radiated output power of the ExtremeWireless AP3825 is below the FCC radio frequency exposure
limits as specified in "Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields" (OET
Bulletin 65, Supplement C). This equipment should be installed and operated with a minimum distance
of 20 cm between the radiator and your body or other colocated operating antennas.
Canada
Industry Canada Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of
Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils Numeriques,"
NMB-003 edictee par le Industrie Canada.
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired
operation.
•
This Class B digital apparatus complies with Canadian ICES-003.
•
Operation in the 5150-5250 MHz band is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
•
Users are advised that high power radars are allocated as primary users (meaning they have priority)
and can cause interference in the 5250-5350 MHz and 5470-5850 MHz bands of LELAN devices.
•
For the product available in the Canadian market, only channels 1 to 11 can be operated. Selection of
other channels in the 2.4 GHz band is not possible.
•
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux conditions suivantes:
•
Le dispositif ne doit pas produire de brouillage préjudiciable.
•
Ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
•
Ce dispositif est conforme à la norme NMB-003 edictee par le Industrie Canada.
•
Les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour
uneutilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux.
•
Les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version .
Regulatory Information
41