Extreme Networks Extreme Wireless WSAP3825i Installation Manual page 45

European Conformance Standards
This equipment meets the following conformance standards:
Safety
•
2006/95/EC Low Voltage Directive (LVD)
•
IEC/EN 60950-1 + National Deviations
EMC (Emissions / Immunity)
•
2004/108/EC EMC Directive
•
EN 55011/CISPR 11, Class B, Group 1 ISM
•
EN 55022/CISPR 22, Class B
•
EN 55024/CISPR 24, includes IEC/EN 61000-4-2,3,4,5,6,11
•
EN 61000-3-2 and -3-3 (Harmonics and Flicker)
•
EN 60601-1-2 (EMC immunity for medical equipment)
•
EN 50385 (EMF)
•
ETSI/EN 301 489-1 & -17
Radio transceiver
•
R&TTE Directive 1999/5/EC
•
ETSI/EN 300 328 (2.4 GHz)
•
ETSI/EN 301 893 (5 GHz)
Other
•
IEEE 802.11a (5 GHz)
•
IEEE 802.11b/g (2.4 GHz)
•
IEEE 802.11n
•
IEEE 802.3at (PoE)
•
IEEE 802.3af (PoE)
RoHS
•
European Directive 2002/95/EC
Conditions of use in the European Community
Some EU countries allow outdoor operation with limitations and restrictions, which are described in this
section. It is the responsibility of the end user to ensure operation in accordance with these rules,
frequencies, and transmitter power output. The ExtremeWireless AP3825 must not be operated until
configured for the customer's geographic location.
Caution
The user or installer is responsible to ensure that the ExtremeWireless AP3825 is operated
according to channel limitations, indoor / outdoor restrictions, license requirements, and
within power level limits for the current country of operation. A configuration utility has been
provided with the Wireless AP to allow the end user to check the configuration and make
necessary configuration changes to ensure proper operation in accordance with the spectrum
usage rules for compliance with the European R&TTE directive 1999/5/EC.
ExtremeWireless™ WS-AP3825i & WS-AP3825e Installation Guide for version .
Regulatory Information
45