BT Versatility
Owners Manual
Call Logging
To prohibit trunk-to-trunk calls on an extension
You may prohibit individual extensions from activating External Divert, External
Transfer and External Conference. (These features set up so-called trunk-to-trunk calls).
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select 'No trunk-to-trunk calls'.
• Select the Extensions to be denied this feature. Those Extensions denied the feature
are indicated by a _.
Press the Hands-free Key to finish programming.
To move a faulty Extension
If an extension interface becomes faulty, you can swap its extension programming to a
different extension. Calls for the faulty extension will be routed to the new extension.
• From the Programming Extension, press the Programme Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select 'Port swapping'.
• Select the faulty Extension from the Extension list.
• Select the new Extension from the Extension list.
Press the Hands-free Key to finish programming.
To Change ringing from 25 to 50 Hz
This option allows the ringing frequency to be changed from the default 25Hz to 50 Hz
on individual extensions
• From the Programming Extension, press the Programme Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select '25/50 Hz ringing'.
• Select the extensions to ring at 50 Hz.
The default is that all extensions are set for 25 Hz ringing.
Inverting ringing cadences
The external and Internal ringing cadences can be interchanged on an extension by
extension basis.
76
until 'System programming' is displayed.
until 'External Diversion' is displayed and select.
until 'Port Swapping' is displayed.
until '25/50 Hz ringing' is displayed.
.
.
.