Ide Configuration - Advantech ARK-3360 User Manual

Intel® SpeedStep® Tech
When set to disabled, the CPU runs at its default speed, when set to enabled,
the CPU speed is controlled by the operating system.
Intel® C-STATE tech
This item allows the CPU to save more power under idle mode.
Enhanced C-States
CPU idle set to enhanced C-States, disabled by Intel® C-STATE tech item.
3.3.2

IDE Configuration

ATA/IDE Configuration
This item allows you to select Disabled / Compatible / Enhanced.
Legacy IDE Channels
When set to Enhanced mode you can select IDE or AHCI mode. When select
Compatible mode you can select SATA only / SATA pri, PATA sec or PATA only.
Primary/Secondary/Third IDE Master/Slave
BIOS auto detects the presence of IDE device, and displays the status of auto
detection of IDE device.
– Type: Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD]
– LBA/Large Mode: Enables or Disables the LBA mode.
– Block (Multi-Sector Transfer): Enables or disables data multi-sectors trans-
fers.
– PIO Mode: Select the PIO mode.
– DMA Mode: Select the DMA mode.
– S.M.A.R.T.: Select the smart monitoring, analysis, and reporting technology.
– 32Bit Data Transfer: Enables or disables 32-bit data transfer.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
Figure 3.5 IDE Configuration
29 ARK-3360 User Manual