Figure 2.9 Dio Connector (Ark-3360F) - Advantech ARK-3360 User Manual

ARK-3360F
Table 2.7: DIO Connector Pin Assignments (ARK-3360F)
Pin
1
2
3
4
5
6
7
8
9
10
2.3.1.5 USB Connector
ARK-3360 provides six USB interface connectors, which give complete Plug & Play
and hot swapping for up to 127 external devices. The USB interface complies with
USB UHCI, Rev. 2.0 compliant. The USB interface can be disabled in the system
BIOS setup. Please refer to Table. 2.8 for its pin assignments. The USB connectors
are used to connect any device that conforms to the USB interface. Most digital
devices conform to this standard. The USB interface supports Plug and Play without
turning off computers.
Table 2.8: USB Connector
Pin
1
3

Figure 2.9 DIO connector (ARK-3360F)

Signal Name
+V5
DIO0
DIO1
DIO2
DIO3
DIO4
DIO5
DIO6
DIO7
GND
Figure 2.10 USB connector
Signal name
VCC
USB_data+
Pin Signal name
2 USB_data-
4 GND
17 ARK-3360 User Manual