Figure 4.9 Ide Configuration - Advantech ITA-1711 Series User Manual

4.2.2.6 IDE Configuration

Serial-ATA
Default setting is "Enabled", which enables all SATA resources.

SATA Test Mode
Default setting is "Enabled", which enables SATA signal testing mode.

SATA Speed Support
Default setting is "Gen2". Select "Gen1" or "Gen2" to change SATA transferring
rate.

SATA Mode
Default setting is "IDE Mode". Users can select "IDE Mode" or "AHCI Mode".
ITA-1711 User Manual

Figure 4.9 IDE configuration

38