FX
-485-BD COMMUNICATION BOARD
2N
7.3.4
Setting retry count (D8178)
Set a value 0 to 10 to the special data register D8178. (Default = 3)
This setting is not required for the slave station.
If master station try to communicate the slave station this retry count or over, communication error occur in the station.
7.3.5
Setting comms time-out (D8179)
Set value 5 to 255 to thespecial data register D8179. (Default = 5)
This value multiply by 10 (ms) is time of comms time-out.
Comms time-out is time-out of communication time between the master station and slave station.
N:N NETWORK
7
7-7