FX
-485-BD COMMUNICATION BOARD
2N
5.
RS EXAMPLE PROGRAM
This example program use RS instruction.
5.1
Printer
When the printer having the RS232C interface is connected to the 485BD via the RS232C/485 signal converter (FX-485PC-IF),
and the data sent from the programmable controller is printed
5.1.1
System Configuration
Send
Printer having
RS232C interface
For communication between the printer and the FX-485PC-IF, use the cable which is consistent with the connector pin
assignment of the printer used. For wiring between the FX-485PC-IF and the 485BD, refer to Section 2.
For the FX-485PC-IF, refer to the users manual of the FX-485PC-IF.
RS EXAMPLE PROGRAM
RS232C/485
signal converter
Send
FX-485PC-IF
FX
2N
485BD
5-1
5