Program Used For Setting - Mitsubishi Electric FX2N-485-BD User Manual

FX -485-BD COMMUNICATION BOARD
2N
7
7.3.6

Program used for setting

M8038
FNC 12
0
K 0
MOV
FNC 12
K 2
MOV
FNC 12
K 1
MOV
FNC 12
K 3
MOV
FNC 12
K 6
MOV
Make sure to write the program above from the 0th step as the N:N network parameter setting program.
This program is not required to be executed because it becomes effective automatically when it is programmed in this position.
Note: Setting of the parameters for the N:N network is started at the 0th step (LD M8038), and finished when any
instruction or device other than the program above is processed.
Station No. setting: Required for
D8176
master station (Set range: 0 to 7)
Total number of slave
D8177 stations: 2
(Setting range: 1 to 7)
Refresh range setting:
D8178
Pattern 1
(Set range: 0 to 2)
Refry count setting:
D8179
3 (3times)
Comms time-out setting:
D8180
6 (60ms)
N:N NETWORK
Not required for
slave station
7-8