External Dimensions - Mitsubishi Electric FX2N-485-BD User Manual

FX -485-BD COMMUNICATION BOARD INTRODUCTION
2N
1
1.1

External Dimensions

Accessory : M3 self-tapping screws × 2,
Dimensions : mm (inches)
Terminal resistor 330 Ω × 2 110 Ω × 1
Mounting holes (2- φ4.0(0.16"))
Connector for programmable controller
SD LED : Flashes at high speed during sending.
RD LED : Flashes at high speed during sending.
Terminals to connect RS485 unit
The top face of this terminal block is higher than the top face of the panel cover
of the programmable controller by approximately 7 mm.
1-2