FX
-485-BD COMMUNICATION BOARD
2N
5
5.2
Personal Computer
When the printer having the RS232C interface is connected to the 485BD via the RS232C/485 signal converter (FX-485PC-IF),
and the data sent from the programmable controller is printed
5.2.1
System Configuration
Send
Reseive
Personal Computer
For communication between the printer and the FX-485PC-IF, use the cable which is consistent with the connector pin
assignment of the printer used. For wiring between the FX-485PC-IF and the 485BD, refer to Section 2.
For the FX-485PC-IF, refer to the users manual of the FX-485PC-IF
Note : Preparation of software
Use ordinary communication software (terminal emulator) or dedicated program in the personal computer.
RS232C/485
signal converter
Send
Reseive
FX-485PC-IF
RS EXAMPLE PROGRAM
FX
2N
485BD
5-4