Bolting Cabinets Together; Bolting Liebert Exm Ups To A Liebert Exm Bdc - Liebert EXM BDC User Manual

1.5

Bolting Cabinets Together

NOTE
UPS wiring must be completed before the cabinets are bolted together.
1. Line up cabinets so that mounting holes are aligned.
Figure 9

Bolting Liebert EXM UPS to a Liebert EXM BDC

A
Place cabinets so mounting holes are aligned.
A bolt from the adjacent cabinet may be screwed into the threaded top hole, or a bolt may be
inserted through the lower hole and screwed into the threaded hole in the adjacent cabinet.
2. Using supplied hardware, bolt the cabinets together. The bolts may be inserted from either the UPS side or from the
Liebert EXM BDC side, whichever is more convenient.
Vertiv | Liebert
®
™
EXM BDC User Manual | Rev. 3 | 01/18 |
Hex Head Bolt,
M10 x 30mm
Washer
Split, M10
Washer
Flat, M10
DETAIL A
15