Washing; Washing Interruption; Program Selection - Meiko K160 Operating Instructions Manual

Operating Instructions - Control MIKE 3 - CE
Datei:BA_MIKE3-CE_KUNDE_9652929_EN_2008-06.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174

3.2.2 Washing

Washing is started by pressing the "Wash" key.
The LED of the "Wash" key is now permanently
illuminated.
"Wash" key
The display shows:
If the basket run switch at the end of the table is
occupied by a basket, the following will appear on
the display:
The machine automatically restarts, when the
washware is removed.
The display shows:

3.2.3 Washing interruption

Washing is interrupted by pressing the "Pause
Wash" key.
All functions, with the exception of the tank
heating, are switched off. (Individual components
may continue running.)
The machine remains ready for operation.
"Pause Wash"
key
The display shows:

3.2.4 Program selection

When the machine is first switched on, it always
starts in programme I.
Different programmes can be selected by
pressing "Programme Selection" key I, II.
"Programme
(Option)
Selection" keys
The programme selected is indicated by the
corresponding LED being permanently
illuminated.
After washing has been interrupted, the machine
restarts in the programme last set.
It is possible to change to a different programme
(I-II) while the machine is running.
W e reserv e the right to change execution and construction!
Update:2009-12-19 MRL
Operation
WT1 65°C KSP1 82°C
Conveyor end switch
WT1 65°C KSP1 82°C
Operation
WT1 65°C KSP1 82°C
Ready for operation
WT1 65°C KSP1 82°C
9652929 6/14