Short Operating Instructions - Meiko K160 Operating Instructions Manual

Operating Instructions - Control MIKE 3 - CE
Datei:BA_MIKE3-CE_KUNDE_9652929_EN_2008-06.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
1

Short operating instructions

Open the stop valve in the water
pipe.
Membrane Meaning
keypad
Starting condition: Machine off!
The machine's wash-tanks are filled and heated
by pressing the "Filling - Heating" key.
The tank heating elements switch on as soon
as, the minimum water level has been reached.
As soon as all the tanks are full, the display
shows:
The machine is "ready for operation" as soon
as, the required tank temperature is reached.
Washing is started by pressing the "Wash" key.
The programme selection buttons ( I – II )
currently have no function.
Washing is interrupted by pressing the "Pause
Wash" key.
The display shows:
The machine is switched off by pressing the
"Machine Off" key.
Switch the power supply from the building off.
See the"Cleaning" chapter in the machine's Operating Instructions.
W e reserv e the right to change execution and construction!
Clean the machine.
Update:2009-12-19 MRL
Switch on the power supply
from the building.
Display
Machine off
Filling
Filling / Heating
WT1 45°C KSP1 80°C
Heating
WT1 45°C KSP1 80°C
Ready for operation
WT1 65°C KSP1 82°C
Operation
WT1 65°C KSP1 82°C
Ready for operation
WT1 65°C KSP1 82°C
Machine off
9652929 3/14