Throttle Delay - FUTABA 10J Instruction Manual

Throttle delay

THR DELAY
Function
When this function is used, the throttle servo
operating speed can be slowed down.
（ Perfect for turbojet engine throttle control, etc. ）
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Delay Rate set
● Select the setting item with
the Jog key.
THR DELAY
■ Activating the function
① Select the "MIX" item and then
select the "ACT" by pressing
the + key or ‒ key.
＋ −
or
● W h e n y o u d o n o t u s e a
function, set to the "INH" side.
② Select
"THR DELAY"
from the menu with the
Jog key.
■ Delay Rate set
② Select the "RATE" item and then adjust
the rate by pressing the + key or ‒ key.
Range：0 ∼ 100%
Default：0%
● When you want to return the set value to the initial value, press
the + key and ‒ key simultaneously.
(ACROBATIC)
③ Open the setting screen by
pressing the Jog key.
● W h e n I N H i s s e l e c t e d , t h e
function cannot be used. To use
the function, select ACT.
（Throttle delay rate）
● It can be set to slow the servo
movement up to +100%
＋ −
or
119