Dual Rate ／ Expo - FUTABA 10J Instruction Manual

D/R,EXPO
Function
D/R
The aileron, elevator and rudder channel control surface angle can be switched in 2 steps
EXP
This function makes operation more pleasant by changing the operating curve so that servo movement
is sluggish or sensitive relative to stick operation near the aileron, elevator, throttle, and rudder neutral
position. Adjustments can be made in 2 steps according to the control surface angle.
Switch selection（SW）
Switches A to H can be selected as the aileron channel, elevator channel, and rudder channel dual rate
(exponential) switch.
：
：
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Channel selection
Switch direction
Switch selection
● Channel selection/Select
the setting item with the
Jog key.
● Jog key is pushed for 1
second, a condition screen
will change.
132
Dual rate ／ EXPO
∼ ／
： ／ ：
② Select
（1 second）
Dual rate
EXPO
（Switch number）
：
／ ：
"D/R,EXPO"
from the menu with the
Jog key.
（Rate）
(HELICOPTER)
③ Open the setting screen by
pressing the Jog key.
● The channel under selection is
underlined.
（present switch position ）
● The dual rate and exponential
settings are displayed by a
curve.
＜ Channel ＞
1：Aileron
2：Elevator
4：Rudder