Table of Contents
Advertisement
Figure 79. Removing the hard drive backplane
3
Lift the backplane out of the system.
Next step
Install the hard drive backplane.
Installing the hard drive backplane
Prerequisite
Follow the safety guidelines listed in
NOTE:
The procedure to install the backplane is similar for all backplane configurations.
Steps
1
Align the slots on the backplane with the hooks on the system.
2
Lower the hard drive backplane until the blue release tabs snap into place.
3
If your backplane has an expander board, then tighten the captive screws to secure the expander board to the system.
Safety
instructions.
Installing and removing system components
119
Advertisement
Table of Contents
