Installing PERC card into the internal PERC riser
Prerequisite
1
Follow the safety guidelines listed in
Steps
1
Insert the PERC card into the internal PERC riser and push the card in.
2
Using a Phillips #2 screwdriver, replace the screw to secure the PERC card on the internal PERC riser.
Figure 54. Installing PERC card into internal PERC riser
Next steps
1
Install the internal PERC riser.
2
install the air shroud.
3
Follow the procedure listed in
Related links
Installing the internal PERC riser
Expansion cards and expansion card risers
An expansion card in the system is an add-on card that can be inserted into an expansion slot on the system board or a slot on a riser card
to add enhanced functionality to the system through the expansion bus.
NOTE:
A System Event Log (SEL) event is logged if an expansion card riser is not supported or missing. It does not prevent your
system from turning on. However, if a F1/F2 pause occurs and an error message is displayed.
96
Installing and removing system components
Safety
instructions.
After working inside your
system.