Features And Controls - Briggs & Stratton 1696614-00 Operator's Manual

Features and Controls

Engine Features and Controls
Please refer to the engine operator's manual for engine fea-
tures and controls
Snowthrower Features and Controls
Compare Figure 2 with the table below.
2
B
E
H
G
A
C
D
F
A
B
C
D
E
Auger Control Lever - Used
to engage and disengage the
auger and impeller.
Speed Select Lever - Allows
the operator to select forward
and reverse speeds.
NOTICE: Do not move speed
select lever while Traction
Control is engaged. This
may result in severe damage
to the drive system.
Deflector Control - In-Dash -
Used to control the angle of the
deflector (up or down).
Chute Rotation Crank -
In-Dash - Used to rotate the
discharge chute to the left or
right.
Free Hand™ Control - After
engaging the traction control
(right hand) and auger control
(left hand), allows the opera-
tor to release the auger control
lever to use other controls.
Traction Control Lever - Used
to propel snowthrower forward
or reverse. See also, "Free-
Hand Control".
en
English
9