Current/Torque Limit; Speed Limit; During Run - YASKAWA VS-616PS5 Series Programming Manual

• Current/Torque Limit (setting: "30")
Closes during torque limit.
• Speed Limit (setting: "31")
Closes when the Speed Limit Level as determined by parameter setting (D5-03) is
reached during torque control. The speed limit is set by D5-04 or the analog input.
• During Run 2 (setting: "37")
Closes during running (does not close during baseblock, injection braking, or initial
excitation).
VS-616PS5 Programming Manual
Section H: Control Circuit Terminal Parameters
H2 Digital Outputs
73