Table of Contents
Advertisement
6.2
Wiring Method
This section describes the wiring to the transmission cable terminal block of the FX5-ASL-M.
Wiring to the transmission cable terminal block
■Connecting a cable
Insert a cable with a wire ferrule into a wire insertion opening and fully push the cable. Then, pull the cable slightly to check
that it is clamped securely.
■Disconnecting a cable
Hold down the open/close button of a cable to disconnect with a flathead screwdriver. Pull out the cable with the open/close
button held down.
6 WIRING
46
6.2 Wiring Method
Advertisement
Table of Contents
Troubleshooting
