Promac 378VLB User Manual page 8

III ADJUST MENT
1. Table Adjustment
A. Height Adjustment
To adjust up or down, loosen the clamp bolt then adjust the table
to your desired position by swing the table bracket handle.
Fig. 12
B. Tilting Adjustment:
Loosen the table bevel lock bolt with adjustable wrench.
Tilt table to desired angle and retighten the bolt. Fig. 13
C. Swing 360 °
Loosen clamp bolt then swing table to appropriate
position and retighten clamp bolt. Fig. 14
2. Feed Depth Adjustment
2-1 Depth control scale sleeve type Loose the clamp bolt
and move to the desired depth then retighten the clamp olt.
Fig. 15-1, 15-2
Table bracket handle
Lock nut
Clamp bolt
Fig.15-2
Fig. 12
Fig. 13
Fig.14
Fig.15-1