Promac 378VLB User Manual page 6

II. ASSEMBLY
1. Assembly the Column
* Place column assembly on base and align holes in column support
with holes in base.
* Secure the column with four or three bolts and washers provided.
2. Install table bracket
2-1 Take off collar and rack
2-2 Install table bracket togeter with rack. Fig. 2.
3. Install bracket handle and clamp bolt. Fig. 4-5
3. Griff der Halterung und Befestigungsschraube installieren
(Abb. 4-5)
Fix handle with attached set screw.
Install clamp bolt to fix table bracket.
6
Fig. 1
Fig. 2
Fig.3
Fig.4
Fig.5