Promac 378VLB User Manual page 3

EN – ENGLISH
NOTE:
It is advisable for user to read this Instruction Manual in order to avoid accident.
If the operation method used in this drilling machine us the same as the method used in ordinary
machine, possible hazard may occur during the process. Therefore, it isimperative that user should pay
extra aution and make sure that his operating method is correct. Slight negligence to any of the safety
measures will certainly cause accident to the user.
The manufacturer designed this machine especially focusing on its scheduled using scope. Therefore, it
is advisable that the user should pay attention not to exceed the said using scope. Also, do not make any
modification to the spare parts and structure of the machine.
If you have any question regarding and operating method of this machine and Cannot find the solution
in the Instruction Manual, please contact your vendor directly.
Correct Operation Instruction of This Machine
1. For your own safety, do not start the said machine before reading the Instruction Manual carefully. One
of the necessary safety measures is to understand its operation principle and operation method first.
2. Do not alter any of the protective pieces in order to maintain its completeness
3. Plug the fan plug for power supply into the socket with earth wire. If your socket dose not have an
earth wire, then connect the earth terminal of this machine
4. Before starting this machine, it is imperative to take away all wrenches and latch handle not connected
to the machine. Also, your should make it a habit to check the surrounding of the said machine every
time before suing, to see there is any small spare part around that may cause running fault breakdown).
5. Before installing the machine, clean your working ground on order to prevent any accident occurring.
6. Do not use this machine in a highly dangerous place. Also, do not install the machine in a humid or
water leaking place. During the process of work, the user should make sure to keep its working ground
clean anytime.
7. Do not let any unauthorized or ignorant person or children near the said machine, and should be sure
to keep a proper distance from the machine anytime.
8. Put a safety lock on the door of your working ground in order to prevent children from starting the
machine.
9. Avoid overloading the machine. Also, for your own safety, be sure to abide to its using scopes.
10. Do not use the machine outside its using scope.
3