Digital Central Extensions Specifications - ABB 07CR41 Operating Manual

3.5.2

Digital central extensions specifications

Weight
Integrated digital inputs
- Number of inputs
- Isolateds inputs (test voltage)
- Types of inputs
- Input voltage:
nominal value
signal at 0 (IEC 1131-2)
signal at 1 (IEC 1131-2)
- Input current at 24 V d.c.
- Signal delay time
- Cable length:
unshielded
shielded
Integrated outputs
- Number of outputs
- Isolated outputs (test voltage)
- Load current, under/channel:
24 V d.c.
alternate 24 to 230 V a.c.
- Total load current
- Output leakage current
- Leakage voltage
- Minimum load
3
Technical specifications
The digital extension units are powered at 5 V by the basic unit or extensible remote unit to
which they are connected.
Warning: the extensions must not be connected or disconnected under power supply.
XI 16 E1
220 g
16
1500 V a.c.
PNP
24 V d.c.
0 to + 5 V
+ 15 to + 30 V
4 mA
5 ms
300 m
500 m
-
-
-
-
-
-
-
-
XO 08 R1 XC 08 L1
220 g 220 g
- 8 configurable
- 1500 V a.c.
- PNP
- 24 V d.c.
0 to + 5 V
+ 15 to + 30 V
- 4 mA
- 5 ms
- 300 m
- 500 m
8 relays 8 transistors
1500 Vrms 1500 V a.c.
1 min 1 min
2 A 0.5 A
2 A AC-1 -
0.5 A AC-15
8 x 2 A 8 x 0.5 A
< 200 µA
0.5 V to 500 mA
max.
10 mA at 12 V
12 V d.c.
3 – 16
XK 08 F1 XO 16N1
220 g 220 g
4 -
1500 V a.c. -
PNP -
24 V d.c. -
0 to + 5 V
+ 15 to + 30 V
7 mA -
5 ms -
300 m -
500 m -
4 relays 16 transistors
1500 Vrms 1500 V a.c.
1 min 1 min
2 A 0.5 A
2 A AC-1 -
0.5 A AC-15
4 x 2 A 16 x 0.5 A
< 200 µA
0.5 V to 500 mA
max.
10 mA at 12 V
12 V d.c.
Advant Controller AC 31 / Issued: 01.99