Appendix; A1 Correspondence Between Variables And Physical Addresses - ABB 07CR41 Operating Manual

Appendix

A1 Correspondence between variables and physical addresses
Advant Controller AC 31 / Issued: 08.99
This paragraph describes the correspondence between the variables and their physical
memory addresses. This information is required for certain functions such as COPY, data
exchange between the CS31 system bus master and slave basic units.
The variable address is given by the segment and offset value.
These values are expressed in hexadecimal format.
H 0000 is the segment for all variables.
The correspondence between the variable and the segment is given in the following table:
Variables
E00,00...E00,07/E00,08...E00,15
E01,00...E01,07/E01,08...E01,15
E02,00...E02,07/E02,08...E02,15
E61,00...E61,07/ E61,08...E61,15
E62,00...E62,07/ E62,08...E62,15
E68,00....E68,15
M00,00....M00,07/M00,08...M00,15
M99,00...M99,15
M230,00...M230,15
M255,00...M255,15
A00,00....A00,07/ A00,08...A00,15
A01,00...A01,15
A02,00...A02,15
A61,00....A61,15
A62,00...A62,15
A68,00....A68,15
MW00,00
MW00,01
MW99,00
MW99,15
MW230,00
MW230,15
MW255,15
Physical addresses (Byte count)
H 1900/H 1901
H 1902/H 1903
H 1904/H 1905
H 197A/H 197B
H 197C/H 197D
H 1988/H 1989
H 1A00/H 1A01
H 1AC6/H 1AC7
H 1AC8/H 1AC9
H 1AFA/H 1AFB
H 1B00/H 1B01
H 1B02/H 1B03
H 1B04/H 1B05
H 1B7A/H 1B7B
H 1B7C/H 1B7D
H 1B88/H 1B89
H 1C00
H 1C02
H 2860
H 287E
H 2880
H 289E
H 2BBE
A – 1 Appendix
3