References - ABB 07CR41 Operating Manual

1.4

References

Products
Basic units
40 series
07 CR 41 24VDC
07 CR 41 120/230VAC
07 CT 41 24VDC
50 series
07 KR 51 24VDC
07 KR 51 120/230VAC
07 KT 51 24VDC
3
• Never short-circuit the battery! There is danger of overheating and explosion. Avoid acci-
dental short-circuits, therefore do not store batteries in metallic containers or boxes and do
not bring them into contact with metallic surfaces.
• Replace the battery only whith the supply voltage on! Otherwise you risk data being
lost.
• Dispose of battery environmentally consciously!
Prior configuration of the basic unit is required to save all or part of the data (see chapter 5). If
the configuration is absent, all functions and internal data will be reset to 0 after a power drop
or cut.
A power cut or drop occurring on a 40 series basic unit will result in all the functions and inter-
nal data being reset to 0.
Centrally extensible basic unit (without CS31 bus connection)
Centrally extensible basic unit
with 8 isolated inputs and 6 relay outputs
RS232 interface for programming or ASCII or MODBUS
nication
24 V d.c. power supply
Centrally extensible basic unit
with 8 isolated inputs and 6 relay outputs
RS232 interface for programming or ASCII or MODBUS
nication
120/230 V a.c. power supply
Centrally extensible basic unit
with 8 isolated inputs and 6 transistor outputs
RS232 interface for programming or ASCII or MODBUS
nication
24 V d.c. power supply
Master and/or slave basic units, extensible centrally and de-
centrally (CS31 system bus)
Decentrally extensible basic unit with CS31 system bus,
with 8 isolated inputs and 6 relay outputs
RS232 or RS485 interface
for programming or ASCII or MODBUS
24 V d.c. power supply
Decentrally extensible basic unit with CS31 system bus,
with 8 isolated inputs and 6 relay outputs
RS232 or RS485 interface
for programming or ASCII or MODBUS
120/230 V a.c. power supply
Decentrally extensible basic unit with CS31 system bus,
with 8 isolated inputs and 6 transistor outputs
RS232 or RS485 interface
for programming or ASCII or MODBUS
24 V d.c. power supply
Introduction
Description
®
communication
®
communication
®
communication
1 – 8
Order no.
1SBP260020R1001
®
commu-
1SBP260021R1001
®
commu-
1SBP260022R1001
®
commu-
1SBP260010R1001
1SBP260011R1001
1SBP260012R1001
Advant Controller AC 31 / Issued: 01.99