Omron BN50T Instruction Manual page 65

5
. Insert a new battery into the UPS as far as it will go. 1)
 Replacement battery pack
BN100T/BN150T: Model BNB300T
Attach the plate cover in order of 2) to 3).
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed. 4)
Do not pinch the cable with the plate cover.
1)
Tighten the 2 screws.
6
. Insert the connector until it is locked. 1)
Hold the battery connector, move the connector hook to the center of the fastening hole
in the plate (2)-1), insert through the hole (2)-2), and lower the connector to lock in the
hole (2)-3).
Lower the front panel (3)).
Note: You may hear a "pop" sound when you connect the battery if it is replaced after the
unit's operation is stopped, but this sound is not
1)
Back of the plate cover
2)-1
Connector's hook
align the hole
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
4)
1)
2)-2 2)-3
Connector
move
through
the hole
Connector
locked
4 Maintenance and Inspection
4-2
2)
3)
abnormal.
3)
Battery connector
2)
Replacing the battery
4
4-11