Omron BN50T Instruction Manual page 34

2 Installation and connection
2-3 Connecting the AC input
4
5
2-10
. Connect the new AC input cable to AC input terminals by screws.
Be careful to polarities of L, N, and G terminals and connect correctly.
Use the new AC input terminal block cover
attached to the new cable.
. Fasten the AC input terminal block cover to the console with screws (2 screws).
BN220T
Tighten the screw
Use Copper Conductor Onl y.
Refer to the instruction manual
for the tightening torque.
BN220T
Use Copper Conductor Onl y.
Refer to the instruction manual
for the tightening torque.
Connect to AC input
ternminals by screws
Connectable wire size
Amount of stripped wire
Tightening torque
Recommended cable size
● Securely fasten the screws with a tightening
Tighten torque of 1.355Nm (12 lb-in) or more.
the screw
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
2
5.0 to 8.0mm
5.5mm
1.355Nm (12lb-in)
8mm (AWG8) 2