Connect Backup Battery; Connect Power - HomeSecure HS-PRO-01 User Manual

HomeSecure HS-PRO-01 Manual: 22-08-2014

3.3 Connect Backup Battery

Connect the wire coming out from the battery to the
white plug on the circuit board. Make sure to press it
all the way down, but avoid using too much pressure.
3.4 Connect Power Supply
Close the alarm panel and connect the AC
power supply to the plug right above the
green cable joints.
NOTE: There is a plug for the power supply,
do not cut the wire.
Copyright © 2015 HomeSecure
9