SMS message when operating:
SMS when Zone Trouble:
9.4 Stop communication
All communication buffers and pending messages are deleted with this action. This function is used eg.
by false alarms or the like.
User refers to the user who has operated the alarm system. If the
alarm panel is operated with the code, and you have named the code,
then the name will be displayed in the SMS.
Event refers to whether the alarm system is activated (Arm Away),
disabled (Disarm) or is in the zone settings (Arm Stay).
Zone refers to the sensor that triggers Zone Trouble (number and
name).
Event refers to which System Trouble that is the case. It may be low
battery, signal etc. For more information see [7.5 System Trouble
(System Error)] on page 30.
Copyright © 2015 HomeSecure
HomeSecure HS-PRO-01 Manual: 22-08-2014
36