4.3.1 Set Zone Type
Follow the procedure below to set zone type for each sensor.
Remember to set zone type for ALL sensors! If you do not set zone type for all
sensors, the alarm system will not function optimally.
4.4 Register Remote Controls
Remote controls are registered in the same way as sensors.
Press the panic button (
by pressing [#] at the end. You can also delete remote controls. Choose [2. Clear Keyfob] in
) on the remote after
Copyright © 2015 HomeSecure
HomeSecure HS-PRO-01 Manual: 22-08-2014
within the 60 seconds to register the remote. Save
.
14