HomeSecure HS-PRO-01 Manual: 22-08-2014
5.5 Install Motion Sensor:
Tamper switch. If the back panel is
removed, the switch triggers alarm.
Self-supervision – hold this button
down while the battery is inserted to
turn status signal on/off.
Detection interval:
TEST: Sensor triggers with no interval
5MIN: The sensor "rests" for 5
minutes after triggering once to save
battery
LED on or off (saves battery).
Internal antenna
Battery lid
LED indicator. Blinks when there is
activity and lights constantly when
low battery.
Sensor surface (note: Is divided for pet
immune sensors).
Copyright © 2015 HomeSecure
18