Register Sensors To The Alarm Panel - HomeSecure HS-PRO-01 User Manual

Before the alarm panel can react to sensors, the sensors must be registered on the alarm panel. The
sensors send a wireless signal when they are triggered. This wireless signal must be registered on the
alarm panel for it to recognize it.

4.2 Register Sensors to the Alarm Panel

Register the sensors before installing them. This will make the whole process
easier.
Make sure to only register one sensor at a time!
Follow the procedure below to register each wireless sensor:
Use the navigation buttons and [#] to get to
want to register. Simply trigger the sensor and the alarm panel will register it. When you get to
the sensor by pressing [#]. Now you can name the sensor. Press [#] at
using the number keys (like an old fashioned SMS message).
Choose [2. Clear WL.] at
Door/window sensor:
Open the back side of the sensor and remove the plastic strip by the battery. Move the magnet close to
the right side of the base and move it away to trigger and register.
. You now have 60 seconds to trigger the sensor you
to clear sensors.
Copyright © 2015 HomeSecure
HomeSecure HS-PRO-01 Manual: 22-08-2014
and type the name you want
, save
11