Connecting To A Smart Device; Making Wi-Fi Settings From The Control Panel; Making Wi-Fi Settings Manually - Epson ET-3600/L605 User Manual

User's Guide

Connecting to a Smart Device

You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.
http://epson.sn > Setup
Note:
If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the
computer first.

Making Wi-Fi Settings from the Control Panel

You can make network settings from the printer's control panel. After connecting the printer to the network,
connect to the printer from the device that you want to use (computer, smart phone, tablet, and so on.)
Related Information
"Making Wi-Fi Settings Manually" on page 20
&
"Making Wi-Fi Settings by Push Button Setup" on page 21
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 22
&
"Making Wi-Fi Direct (Simple AP) Settings" on page 22
&

Making Wi-Fi Settings Manually

You can manually set up the information necessary to connect to an access point from the printer's control panel.
To set up manually, you need the SSID and password for an access point.
Note:
If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.
1. Select Wi-Fi Setup on the home screen, and then press the OK button.
2. Select Wi-Fi Setup Wizard, and then press the OK button.
3. Select the SSID for the access point from printer's control panel, and then press the OK button.
Note:
❏ If the SSID you want to connect to is not displayed on the printer's control panel, select Search Again to update the
list. Still not displayed, select Other Networks, and then enter the SSID directly.
❏ If you do not know the SSID, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the SSID written on the label.
Network Settings
20