Mounting The Solar Panel (Integral Mount) - Emerson FB1100 Instruction Manual

Emerson FB1100 Flow Computer Instruction Manual
D301752X012
July 2017
Figure 2-21: Attaching Mounting Hardware to the Solar Panel
1
2
3
4
5
6
7
8
2.12.2

Mounting the Solar Panel (Integral Mount)

DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
Restriction
The solar panel and lead acid battery combination cannot be used with ATEX/IECEx applications.
The integral mount solar panel cannot be used in a Class I Division 1 area; C1D1 solar panels must
be remote mounted with the solar panel in a safe area.
30
6V, 6W solar panel
Aluminum tilt bracket (2)
10-32 x ½ pan head screw (4). Note: Matching hex nuts and washers not visible in this
graphic; see Items 9 and 10 in Figure 2-19
5/16 flat washer (4); only two visible in this graphic
5/16-18 x .75 LG hex head bolt (2)
5/16-18 hex nut (2); only one visible in this graphic
5/16 flat spring lock washer (2) only one visible; placed on bolt between washer and
nut
Mounting bracket
Installation