Mobile Scada; Status Leds - Emerson FB1100 Instruction Manual

Figure 1-2: HMI Module with LCD
Figure 1-3: HMI Module without LCD
Note
If your flow computer does not include the LCD option (shown in
status LEDs and a single IR button for waking up the device (shown in
1.9

Mobile SCADA

The flow computer has an optional Wi-Fi® transceiver that enables you to connect via a laptop or
tablet from some small distance away.
This capability allows an operator to potentially remain outside the hazardous location and still
communicate with the flow computer. The operator's laptop must have Wi-Fi® capability, line-of-
sight access to the HMI module, and must be loaded with FBxConnect configuration software.
Once connected, the operator can view process values, edit configuration parameters, and collect
logs.
Note
The Mobile SCADA electronics reside inside the HMI module.
Introduction
Emerson FB1100 Flow Computer Instruction Manual
Figure
Figure
D301752X012
July 2017
1-2), you still have the
1-3).
7