2.9
Terminal Plate
The terminal plate includes the various terminal blocks (TB) for power and I/O connections.
Note: AI/AO and DI connections are disabled in the FB1100.
Figure 2-18: Terminal Plate
2.10
Power Modes
To keep power consumption to a minimum, especially for remote sites, the FB1100 can run in two
different power modes – Low Power Mode (4 or 8 MHz CPU clock speed) or Standard Power Mode
(60 MHz CPU clock speed).
2.10.1
Low Power Mode
The FB1100 normally runs in low power mode for typical metering applications. The radio Power
Control function (configurable in FBxConnect) switches the flow computer into standard power
Installation
Emerson FB1100 Flow Computer Instruction Manual
D301752X012
July 2017
25