Oracle MiniCluster S7-2 Service Manual page 15

Although hot service procedures can be performed while the server is running, you should
usually bring it to standby mode as the first step in the replacement procedure. See
MiniCluster For Service" on page 14
This table identifies the components in each category.
Component Service
Category
Hot-service, replaceable by
customer
Cold-service, replaceable by
customer
Cold-service, replaceable by
authorized service personnel
Component
Drives, compute node
Fan modules, compute node
Power supplies, compute
node
HDD or SSD, storage array
Power supplies, storage
array
I/O module, storage array
DIMMs, compute node
Battery, compute node
PCIe cards, compute node
Front indicator module,
compute node
eUSB drive, compute node
Cables, compute node
Drive backplane, compute
node
Motherboard, compute node
for instructions.
Service Information
"Servicing Drives" in SPARC S7-2 Server Service Manual
"Servicing Fan Modules" in SPARC S7-2 Server Service Manual
"Servicing Power Supplies" in SPARC S7-2 Server Service Manual
"Replace a Storage Array HDD or SSD (CRU) " on page 18
"Replace a Storage Array Power Supply (CRU)" on page 24
"Replace a Storage Array I/O Module (CRU)" on page 28
"Servicing DIMMs" in SPARC S7-2 Server Service Manual
"Servicing the Battery" in SPARC S7-2 Server Service Manual
"Servicing PCIe Cards" in SPARC S7-2 Server Service Manual
"Servicing the Front Indicator Module" in SPARC S7-2 Server Service
Manual
"Servicing the eUSB Drive" in SPARC S7-2 Server Service Manual
"Servicing Cables" in SPARC S7-2 Server Service Manual
"Servicing the Drive Backplane" in SPARC S7-2 Server Service Manual
"Servicing the Motherboard" in SPARC S7-2 Server Service Manual
Component Service Categories
"Preparing
Preparing MiniCluster for Service 15